Standard Equipment
Reliability
Micro-Electro-Mechanical Systems (MEMS) sensing delivers broadband vibration data at a fraction of the install cost and footprint. Deploy wired where infrastructure exists, wireless where it doesn't — with the same coverage either way.
Wired where you have infrastructure.
Wireless where you don't.
Blowers, pumps, gearboxes, compressors and mills make up most of the plant floor. Deployment depends on the infrastructure at the mounting point — wired MEMS where cabling and power already reach, wireless MEMS where they don't.
Wired MEMS
- Existing cable trays, conduit and power at the asset
- Continuous streaming — no battery to plan around
- Onboard RPM sensing alongside vibration and temperature
- Widest speed envelope: 20 – 5,000 RPM
Wireless MEMS
- Retrofit skids, remote pump houses, no conduit budget
- Battery life ≥ 5 years
- ATEX-certified variant for explosive-atmosphere zones
- Install in minutes, not shifts
One coverage standard, regardless of deployment.
Wired or wireless, every reading is processed by the same PlantOS™
prescription engine and
delivered as an AI-assisted work order.
The standard rotating equipment that
runs the plant.
Not the specialised few — the everyday many. MEMS sensing is purpose-fit for the asset classes that repeat across every line, in every vertical PlantOS™ serves.
Three sensors. Two deployment
modes. One coverage standard.
Match the sensor to the site, not the other way round. Every variant feeds the same PlantOS™ prescription engine.
Wired MEMS
vEdge 3XTURPM
- Contact temperature range (with vibration pad mounting) −20° C to 85° C
- Equipment with transient load patterns, operating between Revolution Per Minute (RPM) of 20 RPM to 5000 RPM such as
- Blowers
- Compressors
- Mills
- Pumps
- Gearboxes
Thank you for your interest in
PlantOS™ Prescriptive AI.
Enter your official work email to unlock specs delivering
3 outcomes in 1 prescription — zero guesswork.
Wireless MEMS
Thank you for your interest in
PlantOS™ Prescriptive AI.
Enter your official work email to unlock specs delivering
3 outcomes in 1 prescription — zero guesswork.
FitMachine 3XT
- Contact surface temperature range: −20° C to 80° C
- Battery Life ≥ 2 years – varies with duty cycle
- Equipment with transient load patterns, operating between Revolution Per Minute (RPM) of 100 RPM to 3600 RPM such as
- Blowers
- Pumps
- Gearboxes
Thank you for your interest in
PlantOS™ Prescriptive AI.
Enter your official work email to unlock specs delivering
3 outcomes in 1 prescription — zero guesswork.
Thank you for your interest in
PlantOS™ Prescriptive AI.
Enter your official work email to unlock specs delivering
3 outcomes in 1 prescription — zero guesswork.
Wireless MEMS Technology
FitMachine 3XT-Ex
- Asset contact temperature range: −25° C to 75° C
- ATEX certified – suitable for explosive environments
- Battery Life ≥ 5 years – varies with duty cycle
- Equipment with transient load patterns, operating between Revolution Per Minute (RPM) of 20 RPM to 5000 RPM such as
- Blowers
- Pumps
- Gearboxes
Thank you for your interest in
PlantOS™ Prescriptive AI.
Enter your official work email to unlock specs delivering
3 outcomes in 1 prescription — zero guesswork.
